Перейти к основному содержанию

How to Change Strings on a Ukulele

Выберете то, что вам нужно

  1. How to Change Strings on a Ukulele, String: шаг 1, изображение 1 из 1
    • Start by loosening the string you are trying to replace by twisting the pegs.

    • The G and C tuning pegs turn up to tighten and down to loosen while the E and A tuning pegs turn down to tighten and up to loosen.

  2. How to Change Strings on a Ukulele: шаг 2, изображение 1 из 1
    • Next, grab the new string you are using to replace.

    • The packaging will inform you of which string replaces which note—some are different than others so pay attention!

  3. How to Change Strings on a Ukulele: шаг 3, изображение 1 из 1
    • Feed the string through the tie block.

    • Remember to leave slack.

  4. How to Change Strings on a Ukulele: шаг 4, изображение 1 из 1
    • Wrap the string over the tie block and back underneath itself.

  5. How to Change Strings on a Ukulele: шаг 5, изображение 1 из 2 How to Change Strings on a Ukulele: шаг 5, изображение 2 из 2
    • Recross the string over itself again, looping it two or three more times.

  6. How to Change Strings on a Ukulele: шаг 6, изображение 1 из 1
    • Pinch the string and pull tightly.

  7. How to Change Strings on a Ukulele: шаг 7, изображение 1 из 1
    • Now, fasten the string back to the headstock. To do this, feed the string through the hole in the turning peg.

  8. How to Change Strings on a Ukulele: шаг 8, изображение 1 из 1
    • Twist again to tighten and cut off extra string once complete.

Финишная черта

2 участников успешно повторили данное руководство.

Emily Cunnington

Участник с: 09/26/18

211 Репутация

1 руководство автора

Команда

Eastern Washington University, Team S3-G3, Crane Fall 2018 Участник Eastern Washington University, Team S3-G3, Crane Fall 2018

EWU-CRANE-F18S3G3

3 членов

Автор 3 руководств

0 Комментариев

Добавить комментарий

Просмотр статистики:

За последние 24часов: 0

За последние 7 дней: 7

За последние 30 дней: 16

За всё время: 523