Введение
If the temples and top bar of your Ray-Ban Clubmaster glasses have snapped off, use this guide for a quick and easy repair with just a few household materials, no special skills required! The only thing you need to be cautious of is working with super glue in Step 3, but a pair of disposable gloves should keep your hands protected.
This repair guide can apply to any corresponding Ray-Ban Clubmaster sunglasses as well.
Get familiar with basic glasses anatomy here: https://www.smartbuyglasses.ca/optical-c... . These terms will be used throughout the guide.
Выберете то, что вам нужно
-
-
Using the toothpick, remove any manufacturing adhesive inside the top bar of the frame.
-
-
-
Apply rubbing alcohol to a cotton ball and clean inside the top bar of the Clubmaster frame.
-
-
-
-
Let the alcohol dry and apply a thin layer of super glue along the inside of the top bar of the frame, from edge to edge.
-
-
-
Wipe away any excess glue on the lens(es) and frame with a piece of paper towel.
-
-
-
Place the glasses upside down on a piece of paper towel and set in a cool place to dry for 24 hours.
-
If the guide is followed properly your Clubmaster eyeglasses should hold up perfectly!
If the guide is followed properly your Clubmaster eyeglasses should hold up perfectly!
Отменить: Я не выполнил это руководство.
4 человек успешно провели ремонт по этому руководству.
Команду
York University, Team S1-G8, Melo-Thaiss Winter 2021 Участник York University, Team S1-G8, Melo-Thaiss Winter 2021
YORK-MELO-THAISS-W21S1G8
1 член
Автор 2 руководств
