Введение
This guide is for re-staking an overgrown fiddle leaf fig tree plant. Re-staking a plant will improve the living condition of the plant and create healthy growth. This guide will show the steps necessary to re-stake a house plant. These steps use a fiddle leaf fig tree, but any house plant can be used when following this guide.
Выберете то, что вам нужно
-
-
-
Add the lengths measured in previous two steps and cut your bamboo stake to the combined length.
-
-
-
Mark the soil level measurement on the bamboo stake that you obtained in Step 4.
-
-
-
Insert the cut stake into the soil approximately one to three inches from the plant’s base until you can no longer see the mark made in step 6.
-
-
-
Cut three to five sections of Velcro plant tape or twine to approximately five inches long.
-
-
-
Wrap and secure the cut twine or Velcro plant tape gently around both the plant and the stake near the base of the plant three to four inches above the soil level.
-
-
-
Secure the plant to the stake using a second piece of tape halfway up the plant.
-
-
-
Secure the plant to the stake using a third piece of tape one inch from the top of the plant.
-
-
-
Trim any unwanted leaves or branches from the plant using sharp scissors or pruning shears until it is balanced to help prevent the need to re-stake again soon.
-
Enjoy your new, happier plant!
Enjoy your new, happier plant!
Отменить: Я не выполнил это руководство.
3 участников успешно повторили данное руководство.
Команда
University of North Texas, Team S1-G11, Raign Fall 2020 Участник University of North Texas, Team S1-G11, Raign Fall 2020
UNT-RAIGN-F20S1G11
2 членов
Автор 2 руководств
