Перейти к основному содержанию

How to Unclog an Epson ET-2760 Printhead

Выберете то, что вам нужно

  1. How to Unclog an Epson ET-2760 Printhead, How to Unclog an Epson ET-2760 Printhead: шаг 1, изображение 1 из 2 How to Unclog an Epson ET-2760 Printhead, How to Unclog an Epson ET-2760 Printhead: шаг 1, изображение 2 из 2
    • Begin a print of any kind, or a nozzle check.

    • Once the print has begun, pull the power cable out mid-print.

  2. How to Unclog an Epson ET-2760 Printhead: шаг 2, изображение 1 из 2 How to Unclog an Epson ET-2760 Printhead: шаг 2, изображение 2 из 2
    • Open the printer, then pull out the half-printed paper through the slot.

    • Place a thick paper towel or rag under the printhead.

  3. How to Unclog an Epson ET-2760 Printhead: шаг 3, изображение 1 из 3 How to Unclog an Epson ET-2760 Printhead: шаг 3, изображение 2 из 3 How to Unclog an Epson ET-2760 Printhead: шаг 3, изображение 3 из 3
    • Remove the single screw with a Phillips #0 screwdriver.

    • Unclip the two white plastic clips.

    • Lift the top cover off of the printhead.

  4. How to Unclog an Epson ET-2760 Printhead: шаг 4, изображение 1 из 1
    • Unclip the four ink cartridges from the printhead by pulling the small tabs on top of the cartridges.

    • Be sure not to disconnect the ink lines from the cartridges. Simply set the connected cartridges to the side of the printhead.

  5. How to Unclog an Epson ET-2760 Printhead: шаг 5, изображение 1 из 2 How to Unclog an Epson ET-2760 Printhead: шаг 5, изображение 2 из 2
    • Fill a syringe with printhead cleaning solution and place the syringe tip over the holes left by the cartridges.

  6. How to Unclog an Epson ET-2760 Printhead: шаг 6, изображение 1 из 1
    • Begin to flush the manufacturer's recommended amount of solution through each hole onto the paper towel.

    • If necessary, swap out the paper towel in between flushes to prevent any solution from entering the printer.

  7. How to Unclog an Epson ET-2760 Printhead: шаг 7, изображение 1 из 1
    • Remove the paper towel from under the printhead.

  8. How to Unclog an Epson ET-2760 Printhead: шаг 8, изображение 1 из 3 How to Unclog an Epson ET-2760 Printhead: шаг 8, изображение 2 из 3 How to Unclog an Epson ET-2760 Printhead: шаг 8, изображение 3 из 3
    • Reattach each ink cartridge into their original positions.

    • Reattach the two printhead cover clips back onto the printhead.

    • Screw the single screw back into place with a Phillips #0 screwdriver.

  9. How to Unclog an Epson ET-2760 Printhead: шаг 9, изображение 1 из 1
    • Perform an automatic cleaning to ensure that any ink residue is removed.

Заключение

Enjoy your clean printhead!

11 участников успешно повторили данное руководство.

Jack Buttry

Участник с: 02/26/22

385 Репутация

1 руководство автора

Команда

University of Memphis, Team 51-2, Willis Spring 2022 Участник University of Memphis, Team 51-2, Willis Spring 2022

UM-WILLIS-S22S51G2

1 член

Автор 6 руководств

20 Комментариев

Simple but to the point tutorial that detailed every step including the tools and supplies needed. Photos helped tremendously too. Thank you.

Mark DiRollo - Ответить

Where do I find out the "manufacturer's recommended amount of solution" per flush?

Stelios Makrinos - Ответить

Usually it's 5ml

Casper Hon -

But it seems that ink isn't even getting to my yellow and blue heads. At least, the test print shows no yellow or blue at all.

How can I get at the exit (valves?) on the ink storage tanks to make sure they're clear -- without breaking the printer?

Thanks!

warble58 - Ответить

Me too! No yellow or blue coming through.

Tracy - Ответить

Добавить комментарий

Просмотр статистики:

За последние 24часов: 83

За последние 7 дней: 454

За последние 30 дней: 2,221

За всё время: 57,623