Перейти к основному содержанию

Отремонтируйте ваше устройство

Обучение ремонту

Запчасти и инструменты

Введение

Are the grips on your golf clubs getting old? Are your grips not providing you with the grip you need to maximize your performance on the course? This guide will inform you step-by-step on how to change those old grips for new grips.

  1. Tighten golf club on vice clamp. Align the golf club so that the club face is vertical. Note: Make sure you place container underneath the grip to catch excess mineral spray in later steps.
    • Tighten golf club on vice clamp. Align the golf club so that the club face is vertical.

    • Note: Make sure you place container underneath the grip to catch excess mineral spray in later steps.

  2. With the xacto knife cut the old grip off of the club. Remove grip from club.
    • With the xacto knife cut the old grip off of the club.

    • Remove grip from club.

  3. Наборы переключателей Nintendo

    A quick fix to get back in the game

    Shop Switch Kits

    Наборы переключателей Nintendo

    A quick fix to get back in the game

    Shop Switch Kits
  4. Measure the amount of double-sided tape necessary to cover the area of your grip. Place the tape on the club so that it is centered and an extra inch comes off the end of the club.
    • Measure the amount of double-sided tape necessary to cover the area of your grip.

    • Place the tape on the club so that it is centered and an extra inch comes off the end of the club.

  5. Squirt mineral spirits on the tape. Make sure you drench the tape in mineral spirits.
    • Squirt mineral spirits on the tape.

    • Make sure you drench the tape in mineral spirits.

    • Note: it is safe to get mineral spirits on your skin, it is non-toxic.

  6. While the tape still has mineral spray on it, quickly slide the grip all the way down. While the tape still has mineral spray on it, quickly slide the grip all the way down. While the tape still has mineral spray on it, quickly slide the grip all the way down.
    • While the tape still has mineral spray on it, quickly slide the grip all the way down.

  7. Wait 1-2 hours for the mineral spray to dry.
    • Wait 1-2 hours for the mineral spray to dry.

Заключение

To reassemble your device, follow these instructions in reverse order.

Esteban Ortega

Участник с: 09.04.2015

120 Репутация

1 руководство автора

Команда

Cal Poly, Team 30-2, Green Spring 2015 Участник Cal Poly, Team 30-2, Green Spring 2015

CPSU-GREEN-S15S30G2

4 членов

Автор 3 руководств

Один комментарий

Добавить комментарий

Просмотр статистики:

За последние 24часов: 0

За последние 7 дней: 0

За последние 30 дней: 13

За всё время: 673