Введение

This guide will help you to remove the cover plates from your Canon digital camera.

Запчасти

Никакие детали не требуются.

Using a Tri-Wing screwdriver #0, remove the screws from the sides of the camera.
  • Using a Tri-Wing screwdriver #0, remove the screws from the sides of the camera.

    • There are two on each side, and two on the bottom plate.

Добавить комментарий

Gently grip and remove the side cover while holding the Mini-USB cover open.
  • Gently grip and remove the side cover while holding the Mini-USB cover open.

Добавить комментарий

  • Grip the camera from the sides and carefully remove the screen cover. Start at the bottom edge and slowly lift up the cover. Pay special attention to the area with the camera/video switch.

    • While still gripping the sides, remove the front cover. Again, start at the bottom edge and slowly lift up the cover. Once you are done with the screen cover, remove the screw by the power switch that is anchoring the side plate and the sides will come off.

Добавить комментарий

Заключение

To reassemble your device, follow these instructions in reverse order.

3 участников успешно повторили данное руководство.

Stanley

Участник с: 30.01.2011

369 Репутация

Автор 4 руководств

Команда

Cal Poly, Team 4-33, Regan Winter 2011 Member of Cal Poly, Team 4-33, Regan Winter 2011

CPSU-REGAN-W11S4G33

4 членов

Автор 5 руководств

Комментариев: 0

Добавить комментарий

Просмотр статистики:

За 24 часа: 0

За 7 дней: 1

За 30 дней: 5

За всё время: 4,891