Введение

Full video:

This process requires a rework station.

This is common problem with PSP E1000 caused by bad solder joints. This can be fixed with a bit of preheating.

Video Overview

  1. Let's start dismantling. Let's start dismantling. Let's start dismantling.
    • Let's start dismantling.

  2. Insert wisdom here. Insert wisdom here. Insert wisdom here.
    • Insert wisdom here.

  3. Disassembling the screen. Disassembling the screen. Disassembling the screen.
    • Disassembling the screen.

  4. Remove this screw. Remove this screw.
    • Remove this screw.

  5. Free shipping on all orders over 100,00 $ or containing a Pro Tech Toolkit!

    Посмотрите наш магазин
  6. Insert wisdom here. Insert wisdom here. Insert wisdom here.
    • Insert wisdom here.

  7. Insert wisdom here. Insert wisdom here. Insert wisdom here.
    • Insert wisdom here.

  8. Carefully disconnect the battery connector! Carefully disconnect the battery connector! Carefully disconnect the battery connector!
    • Carefully disconnect the battery connector!

  9. Remove the thermal tape. Remove the thermal tape. Remove the thermal tape.
    • Remove the thermal tape.

  10. You must resolder main processor with Rework Station (this is special equipment). You must resolder main processor with Rework Station (this is special equipment).
    • You must resolder main processor with Rework Station (this is special equipment).

  11. Cleaning and assembling. . Please SUBSCRIBE to my channel  ツ
Заключение

To reassemble your device, follow these instructions in reverse order.

3 участников успешно повторили данное руководство.

ZFix

Участник с: 09.12.2013

162 434 Репутация

Автор 304 руководств

Команда

Master Techs Member of Master Techs

Community

280 членов

Автор 783 руководств

Комментариев: 0

Просмотр статистики:

За 24 часа: 3

За 7 дней: 27

За 30 дней: 90

За всё время: 8,158