Перейти к основному содержанию

Введение

Microsoldering technique for replacing a faulty IC to restore touch functionality in the iPhone 6.

Инструменты

Запчасти

Детали не указаны.

    • In this tutorial you will learn how to resolve hardware touch issue in an iPhone 6 smartphone. In case of any troubles contac me through the comments.

Заключение

To reassemble your device, follow these instructions in reverse order.

10 участников успешно повторили данное руководство.

Alex Sander

Участник с: 28.02.2017

36 874 Репутация

Автор 202 руководств

Комментариев: 8

Do you change that ic with new one?

thanks before

aqsha asri - Ответить

No, I have desoldered the proper chip from the other motherboard. Thanks for your interest and best luck with the repair!

Alex Sander -

Is it a good idea to change the whole screen

michael quartey - Ответить

You are right, but sometimes it won’t work. Especially when it is a hardware issue.

Alex Sander -

? the logic board is not attached to the screen ... it has nothing to do with the screen, it is that - processor where one of the soldering points is not making contact and the tutorial shows just reheating to the point the soldering melts again and the crack or whatever that makes the connexion is broken gets fixed again, right?

Sven AERTS -

Добавить комментарий

Просмотр статистики:

За последние 24часов: 3

За последние 7 дней: 11

За последние 30 дней: 40

За всё время: 10,029