Перейти к основному содержанию

Отремонтируйте ваше устройство

Обучение ремонту

Магазин

  1. On the side of the cartridge is a small electronic contact card with 4 contacts.
    • On the side of the cartridge is a small electronic contact card with 4 contacts.

    • For those who are interested in transposing on other models, at the back of the contact card point is a EEPROM BR24L01A-W type memory.

  2. SKIP THE UPGRADE

    Save by fixing with an all-in-one kit.

    Shop iPhone Fix Kits

    SKIP THE UPGRADE

    Save by fixing with an all-in-one kit.

    Shop iPhone Fix Kits
  3. The EDPROM can be reprogrammed thanks to an Arduino UNO card, for instance. Prepare an Arduino UNO card with the following pins:
    • The EDPROM can be reprogrammed thanks to an Arduino UNO card, for instance.

    • Prepare an Arduino UNO card with the following pins:

    • Pin 1 (SCL) connected to A5

    • Pin 2 (SDA) connected to A4

    • Pin 3 (5V) connected to the 5V port on the Arduino card

    • Pin 4 (GND) connected to GND on the Arduino card.

  4. Download the ICI program file
    • Download the ICI program file

    • Start Arduino and open the .ino file

    • Upload the program to the Arduino Uno board

    • Launch the serial monitor via the button at the top right

    • Make contact on the cartridge card. The 4 contacts need to work well at the same time

    • Follow the instructions to reprogram the memory according to the correct color (Black, Cyan, Magenta, Yellow)

Заключение

By reinstalling the cartridge in the printer, it identifies it as 100% full!

Еще один человек закончил это руководство.

Особая благодарность этим переводчикам:

100%

Эти переводчики помогают нам починить мир! Хотите внести свой вклад?
Начните переводить ›

MattMich

Участник с: 08.02.2016

31 Репутация

1 руководство автора

Комментариев: 0

Добавить комментарий

Просмотр статистики:

За последние 24часов: 0

За последние 7 дней: 1

За последние 30 дней: 1

За всё время: 234