Перейти к основному содержанию

Введение

Follow this guide to replace the back panel on your Huawei Ascend P6-U06.

  1. Firmly push down on the black plastic covering at the bottom of the phone, and pull down. You may need a sharp thin object to get underneath the plastic.
    • Firmly push down on the black plastic covering at the bottom of the phone, and pull down.

    • You may need a sharp thin object to get underneath the plastic.

  2. Rotate the phone 180 degrees so that the bottom of the phone is now facing up. Firmly push up on the back panel with your thumbs.
    • Rotate the phone 180 degrees so that the bottom of the phone is now facing up.

    • Firmly push up on the back panel with your thumbs.

    • Lift up the back panel from the top right corner and gently pull it away from the phone.

Заключение

To reassemble your device, follow these instructions in reverse order.

13 участников успешно повторили данное руководство.

Alison Jones

Участник с: 14.10.2014

379 Репутация

1 Guide authored

Команда

Cal Poly, Team 4-44, Amido Fall 2014 Member of Cal Poly, Team 4-44, Amido Fall 2014

CPSU-AMIDO-F14S4G44

5 членов

Автор 11 руководств

Добавить комментарий

Просмотр статистики:

Past 24 Hours: 0

Past 7 Days: 5

Past 30 Days: 17

За всё время: 4,645