Перейти к основному содержанию

Отремонтируйте ваше устройство

Обучение ремонту

Запчасти и инструменты

Введение

Follow the guide to replace touchscreen glass

  1. Open the SD slot and remove the screw hidden under the sticker.
    • Open the SD slot and remove the screw hidden under the sticker.

  2. Use an opening pick to disengage the clips securing the back cover. Use an opening pick to disengage the clips securing the back cover. Use an opening pick to disengage the clips securing the back cover.
    • Use an opening pick to disengage the clips securing the back cover.

  3. Nintendo Switch Kits

    A quick fix to get back in the game

    Shop Switch Kits

    Nintendo Switch Kits

    A quick fix to get back in the game

    Shop Switch Kits
  4. Carefully swing up the display assembly, still connected by the touchscreen and display ribbon cables. Disconnect the touchscreen connector. Disconnect the display connector.
    • Carefully swing up the display assembly, still connected by the touchscreen and display ribbon cables.

    • Disconnect the touchscreen connector.

    • Disconnect the display connector.

  5. Remove the 6 screws that secure the 2 metal stripes holding the display. Remove the display. Remove the display.
    • Remove the 6 screws that secure the 2 metal stripes holding the display.

    • Remove the display.

  6. Apply heat on the panel edges. Use an opening pick to separate the glass panel from the plastic frame. Apply heat on the panel edges. Use an opening pick to separate the glass panel from the plastic frame. Apply heat on the panel edges. Use an opening pick to separate the glass panel from the plastic frame.
    • Apply heat on the panel edges. Use an opening pick to separate the glass panel from the plastic frame.

  7. Remove any remaining adhesive and piece of glass to allow adhesive and glass panel replacement. Remove any remaining adhesive and piece of glass to allow adhesive and glass panel replacement.
    • Remove any remaining adhesive and piece of glass to allow adhesive and glass panel replacement.

Заключение

To assemble the device, follow these instructions in reverse order.

19 участников успешно повторили данное руководство.

Особая благодарность этим переводчикам:

100%

Эти переводчики помогают нам починить мир! Хотите внести свой вклад?
Начните переводить ›

Smilzo

Участник с: 09.11.2013

6 331 Репутация

Автор 36 руководств

Комментариев: 4

Not very clear unlike other guides I have followed….

Tracey Homeward - Ответить

Ottimo video,

ti chiedo un consiglio, stavo cambiando il display al mio Huawei T1 A21 quando il connettore sul circuito stampato che collega il touch-screen si è danneggiato.

E’ un connettore particolare 25 pin + 28 e non riesco a trovarlo, sai dirmi come reperirlo?

grazie

Antonio

Antonio Durighello - Ответить

Ciao,non saprei dirti dove trovarlo, io farei delle

ricerche online.

Nel caso che lo trovi è comunque un’intervento abbastanza complesso di saldatura ma visto che comunque è rotto tentare non nuoce.

attrezzati bene.

buona fortuna

Smilzo - Ответить

Ciao,non saprei dirti dove trovarlo, io farei delle

ricerche online.

Nel caso che lo trovi è comunque un’intervento abbastanza complesso di saldatura ma visto che comunque è rotto tentare non nuoce.

attrezzati bene.

buona fortuna

Smilzo - Ответить

Добавить комментарий

Просмотр статистики:

За последние 24часов: 5

За последние 7 дней: 45

За последние 30 дней: 171

За всё время: 15,982