Запчасти

Никакие детали не требуются.

  1. Unscrew the 20 Phillips screws on the underside of the T42.
    • Unscrew the 20 Phillips screws on the underside of the T42.

      • For ease of reassembly, keep your screws organized.

    Добавить комментарий

  2. Unscrew the 2 Phillips screws on both sides of the T42's rear.
    • Unscrew the 2 Phillips screws on both sides of the T42's rear.

    leave these four screws alone. No need to remove them.

    fredwb - Ответить

    Of course you need to remove them you Dingbat! They are the main anchors of the screen hinges, Doh!

    wbcam -

    There are tiny numbers showing the lengths of the screws. 1-2-3-4 where 1 is the shortest.

    The dark red circles are not very easy to see. How about white ones?

    mattikaki - Ответить

    • Flip the laptop over and open the screen.

      • The bezel and keyboard will be loose, be careful.

    Добавить комментарий

    • Carefully maneuver the palm rest away from the keyboard, as both the keyboard and palm rest/trackpad will come off together.

      • Remember, both the keyboard and trackpad have connectors to the motherboard. Disconnect these before completely removing either component.

    Добавить комментарий

Заключение

To reassemble your device, follow these instructions in reverse order.

2 участников успешно повторили данное руководство.

Austin Kidd

Участник с: 21.04.2010

236 Репутация

Автор 3 руководств

Команда

Cal Poly, Team 29-76, Johann Spring 2010 Member of Cal Poly, Team 29-76, Johann Spring 2010

CPSU-JOHANN-S10S29G76

4 членов

Автор 30 руководств

Комментариев: 0

Добавить комментарий

Просмотр статистики:

За 24 часа: 0

За 7 дней: 1

За 30 дней: 15

За всё время: 8,906