Перейти к основному содержанию

Отремонтируйте ваше устройство

Обучение ремонту

Магазин

Введение

If your computer has trouble reading discs and/or the disc drive is not working, it might need to be replaced. This guide will show you step by step how to replace the disc drive.

  1. Place the computer on its side so that the disc drive is facing up.
    • Place the computer on its side so that the disc drive is facing up.

    • Push in the release lever shown.

  2. Once the tab pops out, pull it away from the computer to release the disc drive.
    • Once the tab pops out, pull it away from the computer to release the disc drive.

  3. Pull the disc drive away from the laptop to fully remove it. Pull the disc drive away from the laptop to fully remove it.
    • Pull the disc drive away from the laptop to fully remove it.

  4. Insert new disk drive back into laptop
    • Insert new disk drive back into laptop

  5. Be sure to push the pull tab in as shown in the picture.
    • Be sure to push the pull tab in as shown in the picture.

Заключение

To reassemble your device, follow these instructions in reverse order.

4 участников успешно повторили данное руководство.

Kyle

Участник с: 18.04.2013

377 Репутация

Автор 4 руководств

Команда

Cal Poly, Team 8-58, Johann Spring 2013 Участник Cal Poly, Team 8-58, Johann Spring 2013

CPSU-JOHANN-S13S8G58

4 членов

Автор 10 руководств

Комментариев: 0

Добавить комментарий

Просмотр статистики:

За последние 24часов: 2

За последние 7 дней: 5

За последние 30 дней: 15

За всё время: 968