Перейти к основному содержанию

InFocus IN3104 Lamp Replacement

Выберете то, что вам нужно

  1. InFocus IN3104 Lamp Replacement, Top Cover: шаг 1, изображение 1 из 3 InFocus IN3104 Lamp Replacement, Top Cover: шаг 1, изображение 2 из 3 InFocus IN3104 Lamp Replacement, Top Cover: шаг 1, изображение 3 из 3
    • Turn the projector so that the lens is facing you.

    • On the left side of the projector, there is a screw and a knob inside of the small grate.

    • Use a Phillips #1 screwdriver to remove the 6 mm screw that secures top cover.

    • Remove the service cover.

  2. InFocus IN3104 Lamp Replacement: шаг 2, изображение 1 из 3 InFocus IN3104 Lamp Replacement: шаг 2, изображение 2 из 3 InFocus IN3104 Lamp Replacement: шаг 2, изображение 3 из 3
    • Use a Phillips #1 screwdriver to remove the seven 6 mm screws.

    • Use a Phillips #1 screwdriver to remove the two 5 mm screws.

    • Remove the top cover.

    • Do not pull the cover too hard. It may damage the wire that is connected to the motherboard.

  3. InFocus IN3104 Lamp Replacement, InFocus IN3104 Metal Cover Disassembly: шаг 3, изображение 1 из 2 InFocus IN3104 Lamp Replacement, InFocus IN3104 Metal Cover Disassembly: шаг 3, изображение 2 из 2
    • Use a Phillips #1 screwdriver to remove the nine 6 mm screws.

    • Lift up the metal cover and set it aside to reveal the motherboard.

  4. InFocus IN3104 Lamp Replacement: шаг 4, изображение 1 из 3 InFocus IN3104 Lamp Replacement: шаг 4, изображение 2 из 3 InFocus IN3104 Lamp Replacement: шаг 4, изображение 3 из 3
    • Carefully pry up the black plastic locking bar of the ZIF connector on the motherboard with a plastic spudger.

    • Pull out the blue-tipped, white ribbon cable from the connector.

    • Remove the metal cover.

  5. InFocus IN3104 Lamp Replacement, Lamp: шаг 5, изображение 1 из 3 InFocus IN3104 Lamp Replacement, Lamp: шаг 5, изображение 2 из 3 InFocus IN3104 Lamp Replacement, Lamp: шаг 5, изображение 3 из 3
    • Use a Phillips #0 screwdriver to remove the four 6 mm screws.

    • You may need to use a flexible extender to help remove the screws easily.

  6. InFocus IN3104 Lamp Replacement: шаг 6, изображение 1 из 3 InFocus IN3104 Lamp Replacement: шаг 6, изображение 2 из 3 InFocus IN3104 Lamp Replacement: шаг 6, изображение 3 из 3
    • Remove the lamp power cable situated beside the lamp by pulling it straight out.

    • Remove the lamp by pulling it straight out from the device.

Заключение

To reassemble your device, follow these instructions in reverse order.

Tae Min Kim

Участник с: 01/24/20

409 Репутация

Автор 5 руководств

Команда

0 Комментариев

Добавить комментарий

Просмотр статистики:

За последние 24часов: 0

За последние 7 дней: 0

За последние 30 дней: 6

За всё время: 592