Перейти к основному содержанию

Этот документ имеет более свежие изменения. Перейти к последней непроверенной версии.

India Mark II Riser Main Coupling Replacement

Абсолютно необходимое руководство
Это руководство предназначено только для использования в качестве обязательного условия для других руководств. Оно не полностью само по себе.

Выберете то, что вам нужно

  1. India Mark II Riser Main Coupling Replacement, Riser Main Coupling: шаг 1, изображение 1 из 2 India Mark II Riser Main Coupling Replacement, Riser Main Coupling: шаг 1, изображение 2 из 2
    • Place a coupling over the pump rod, on top of the rod vise.

  2. India Mark II Riser Main Coupling Replacement: шаг 2, изображение 1 из 3 India Mark II Riser Main Coupling Replacement: шаг 2, изображение 2 из 3 India Mark II Riser Main Coupling Replacement: шаг 2, изображение 3 из 3
    • Reattach the T-handle to the top of the pump rod.

  3. India Mark II Riser Main Coupling Replacement: шаг 3, изображение 1 из 3 India Mark II Riser Main Coupling Replacement: шаг 3, изображение 2 из 3 India Mark II Riser Main Coupling Replacement: шаг 3, изображение 3 из 3
    • Loosen and remove the rod vise from the pump rod.

    • The coupling will drop down onto the riser main.

  4. India Mark II Riser Main Coupling Replacement: шаг 4, изображение 1 из 2 India Mark II Riser Main Coupling Replacement: шаг 4, изображение 2 из 2
    • Screw the coupling onto the end of the riser main.

    • Use a pipe wrench to tighten the coupling onto the riser main.

Заключение

To reassemble your device, follow these instructions in reverse order.

Andrew Optimus Goldheart

Участник с: 10/17/09

502 332 Репутация

Автор 407 руководств

Команда

iFixit Участник iFixit

Staff

136 членов

Автор 16 573 руководств

0 Комментариев

Добавить комментарий

Просмотр статистики:

За последние 24часов: 0

За последние 7 дней: 0

За последние 30 дней: 0

За всё время: 30