Перейти к основному содержанию

Введение

The disassembling of the monitor is so to be able to change the screen or replace other components of the monitor.

  1. Start by gently inserting the plastic opening tool between the led and casing.
    • Start by gently inserting the plastic opening tool between the led and casing.

  2. Slowly pry the cover away from the bottom using the plastic opening tool.
    • Slowly pry the cover away from the bottom using the plastic opening tool.

  3. Skip the upgrade.

    Take $10 off $50 with
    SKIPANDSAVE10

    Save Now

    Skip the upgrade.

    Take $10 off $50 with
    SKIPANDSAVE10

    Save Now
  4. Glide the tool around the entire cover to reveal the screws, which are 5.0 mm.
    • Glide the tool around the entire cover to reveal the screws, which are 5.0 mm.

  5. Remove the cover and set it aside.
    • Remove the cover and set it aside.

  6. Remove the four corner screws, 5.0 mm, using a J1 bit. Lift the top away from the bottom using the metal spudger. Be careful not to rip the antenna wire.
    • Remove the four corner screws, 5.0 mm, using a J1 bit.

    • Lift the top away from the bottom using the metal spudger. Be careful not to rip the antenna wire.

Заключение

To reassemble your device, follow these instructions in reverse order.

6 участников успешно повторили данное руководство.

Larsha Johnson

Участник с: 26.08.2015

478 Репутация

Автор 3 руководств

Команда

USF Tampa, Team 6-4, Remmell Fall 2015 Member of USF Tampa, Team 6-4, Remmell Fall 2015

USFT-REMMELL-F15S6G4

4 членов

Автор 3 руководств

Комментариев: 2

What is the part number for the LCD?

jstarion - Ответить

From the pictures LQ035NC111 seem to be the part number.

Michael C -

Добавить комментарий

Просмотр статистики:

За 24 часа: 0

За 7 дней: 0

За 30 дней: 0

За всё время: 5,819