Перейти к основному содержанию

Inse N500 Motor Replacement

Выберете то, что вам нужно

  1. Inse N500 Motor Replacement, Dustbin: шаг 1, изображение 1 из 3 Inse N500 Motor Replacement, Dustbin: шаг 1, изображение 2 из 3 Inse N500 Motor Replacement, Dustbin: шаг 1, изображение 3 из 3
    • Unclip the plastic band from the vacuum head.

  2. Inse N500 Motor Replacement: шаг 2, изображение 1 из 2 Inse N500 Motor Replacement: шаг 2, изображение 2 из 2
    • Remove six 6 mm screws using a Phillips #0 screwdriver.

  3. Inse N500 Motor Replacement: шаг 3, изображение 1 из 2 Inse N500 Motor Replacement: шаг 3, изображение 2 из 2
    • Remove the vacuum head guard.

  4. Inse N500 Motor Replacement: шаг 4, изображение 1 из 2 Inse N500 Motor Replacement: шаг 4, изображение 2 из 2
    • Remove the ten 4 mm screws using a Phillips #0 screwdriver.

    • There are five screws on each side of the vacuum.

  5. Inse N500 Motor Replacement: шаг 5, изображение 1 из 2 Inse N500 Motor Replacement: шаг 5, изображение 2 из 2
    • Remove the single 4 mm screw from the circuit board using a Phillips #0 screwdriver.

  6. Inse N500 Motor Replacement: шаг 6, изображение 1 из 2 Inse N500 Motor Replacement: шаг 6, изображение 2 из 2
    • Unfasten the remaining clips.

  7. Inse N500 Motor Replacement: шаг 7, изображение 1 из 3 Inse N500 Motor Replacement: шаг 7, изображение 2 из 3 Inse N500 Motor Replacement: шаг 7, изображение 3 из 3
    • Remove the dustbin.

  8. Inse N500 Motor Replacement, Motor: шаг 8, изображение 1 из 2 Inse N500 Motor Replacement, Motor: шаг 8, изображение 2 из 2
    • Unfasten the surrounding motor clips and remove the motor.

Заключение

To reassemble your device, follow these instructions in reverse order.

Еще один человек закончил это руководство.

Siaosi Kaufusi

Участник с: 09/12/23

661 Репутация

Автор 5 руководств

Команда

University of North Texas, Team 2-6, Harold Fall 2023 Участник University of North Texas, Team 2-6, Harold Fall 2023

UNT-HAROLD-F23S2G6

3 членов

Автор 5 руководств

Один комментарий

Please 🙏 the motor of roborock h7 please 🙏

Wayl - Ответить

Добавить комментарий

Просмотр статистики:

За последние 24часов: 4

За последние 7 дней: 13

За последние 30 дней: 47

За всё время: 257