Перейти к основному содержанию

Введение

How to replace the fuse on Insignia Ice Maker.

Запчасти

No parts specified.

  1. Remove the 6 screws along the bottom of the rear casing. Remove the 6 screws along the bottom of the rear casing. Remove the 6 screws along the bottom of the rear casing.
    • Remove the 6 screws along the bottom of the rear casing.

  2. Комплект инструментов для замены батареи Macbook

    Доступно с $69.99

    Buy Now

    Комплект инструментов для замены батареи Macbook

    Доступно с $69.99

    Buy Now
  3. Remove the plastic cover over the circuit board by pressing the lever on the side. A pry tool may be required. Remove the plastic cover over the circuit board by pressing the lever on the side. A pry tool may be required.
    • Remove the plastic cover over the circuit board by pressing the lever on the side. A pry tool may be required.

  4. Remove the fuse with a plastic pry tool. Remove the fuse with a plastic pry tool. Remove the fuse with a plastic pry tool.
    • Remove the fuse with a plastic pry tool.

Заключение

To reassemble your device, follow these instructions in reverse order.

Evan Taylor

Участник с: 18.01.2018

544 Репутация

Автор 5 руководств

Команда

Cal Poly, Team S21-G3, Banghart Winter 2018 Member of Cal Poly, Team S21-G3, Banghart Winter 2018

CPSU-BANGHART-W18S21G3

2 членов

Автор 5 руководств

Комментариев: 0

Добавить комментарий

Просмотр статистики:

За 24 часа: 1

За 7 дней: 2

За 30 дней: 6

За всё время: 72