Перейти к основному содержанию

Installation/Removal of the WIC/HWIC card

Рекомендуемый документ

  1. Installation/Removal of the WIC/HWIC card, Turn the equipment off: шаг 1, изображение 1 из 1
    • In order to install or remove a card the equipment should be turned off.

  2. Installation/Removal of the WIC/HWIC card, Remove the port covers on the EHWIC: шаг 2, изображение 1 из 3 Installation/Removal of the WIC/HWIC card, Remove the port covers on the EHWIC: шаг 2, изображение 2 из 3 Installation/Removal of the WIC/HWIC card, Remove the port covers on the EHWIC: шаг 2, изображение 3 из 3
    • Loosen the cards' screws.

    • Do not remove them completely. Once they are loose the spring will push the screw outwards.

    • To remove, pull on the card.

    • It is recommended that you clean the card of dust.

  3. Installation/Removal of the WIC/HWIC card, Insert the card: шаг 3, изображение 1 из 2 Installation/Removal of the WIC/HWIC card, Insert the card: шаг 3, изображение 2 из 2
    • Insert the card or install the protective router cover to avoid dust accumulation.

Заключение

To re-assemble your device, follow these instructions in reverse.

Еще один человек закончил это руководство.

Особая благодарность этим переводчикам:

es en

100%

WhoDat?помогает нам починить мир! Хотите внести свой вклад?
Начните переводить ›

Прикрепленные документы

Eneider Colina

Участник с: 09/20/13

2 362 Репутация

Автор 9 руководств

Команда

Comunidad para traductores de español Участник Comunidad para traductores de español

Community

23 членов

Автор 193 руководств

0 Комментариев

Добавить комментарий

Просмотр статистики:

За последние 24часов: 1

За последние 7 дней: 4

За последние 30 дней: 9

За всё время: 736