Перейти к основному содержанию

Введение

This guide will teach the reader to install a new Battery Circuit Connector into the battery case. This may need to be done if the batteries are not delivering electricity into the camera.

Запчасти

No parts specified.

  1. Flip the camera over so the bottom is facing you. Flip the camera over so the bottom is facing you.
    • Flip the camera over so the bottom is facing you.

  2. Open the cover on the bottom by sliding it in the direction of the arrow. Open the cover on the bottom by sliding it in the direction of the arrow.
    • Open the cover on the bottom by sliding it in the direction of the arrow.

  3. Remove the batteries by pulling up on the top with your fingers.
    • Remove the batteries by pulling up on the top with your fingers.

  4. Remove the three screws from the circuit connector.
    • Remove the three screws from the circuit connector.

  5. Remove the connector from the battery holder door.
    • Remove the connector from the battery holder door.

Заключение

To reassemble your device, follow these instructions in reverse order.

One other person completed this guide.

Nick Oleskowicz

Участник с: 03.04.2012

263 Репутация

Автор 3 руководств

Команда

Cal Poly, Team 15-13, Forte Spring 2012 Member of Cal Poly, Team 15-13, Forte Spring 2012

CPSU-FORTE-S12S15G13

5 членов

Автор 5 руководств

Комментариев: 0

Добавить комментарий

Просмотр статистики:

За 24 часа: 0

За 7 дней: 0

За 30 дней: 0

За всё время: 1,352