JBL Flip 5 Outer Case Replacement

Введение

The outer case replacement or simply removal is a good place to start if you need to replace the outer case or if you need to replace or repair anything inside the JBL Flip 5. Once removed, it's a good idea to check for dirt buildup or anything that might be under the case that might affect device performance.

Выберете то, что вам нужно

Шаг 1 Outer Case

JBL Flip 5 Outer Case Replacement, Outer Case: шаг 1, изображение 1 из 2

JBL Flip 5 Outer Case Replacement, Outer Case: шаг 1, изображение 2 из 2

Insert the flat edge of the metal spudger underneath the corner of the outer case.
Use the spudger to pry open the plastic clips that secure the outer case.

Редактировать

Шаг 2

Once all the clips are released, you will be able to pull up that edge of the case.

Редактировать

Шаг 3

Once one side is released, complete the previous two steps with the other side.
This side contains the buttons, so be careful so as to not damage them while prying the case off.

Редактировать

Шаг 4

Once all the clips are removed, you can gently remove the outer case.
The case is now fully removed. Now a new case will be attached by putting the case into position and pushing on the clips to reattach them.

Редактировать