Введение
This guide will demonstrate how to effectively remove and replace the headphone jack. This replacement will take 15-20 minutes. However, if the guide is followed to the letter, the task will be accomplished with minimal damage to the device.
Выберете то, что вам нужно
-
-
Use a Philips screwdriver to remove the four screws: two at the top and two at the bottom of the device.
-
-
-
Place the device screen down on the table and use a pry tool to remove the back panel.
-
-
-
-
For your safety, remove the battery.
-
Using a solder iron, remove the wires connecting the battery to the motherboard.
-
-
-
Remove the screw attaching the motherboard to the back panel. Gently remove the motherboard.
-
-
-
The headphone jack is attached to the motherboard, so the whole thing must be replaced.
-
With the new mother board, use these steps in reverse to reassemble the device.
-
To reassemble your device, follow these instructions in reverse order.
To reassemble your device, follow these instructions in reverse order.
Отменить: Я не выполнил это руководство.
Еще один человек закончил это руководство.
Команда
IUPUI, Team 1-3, Wilson Fall 2015 Участник IUPUI, Team 1-3, Wilson Fall 2015
IUPUI-WILSON-F15S1G3
4 членов
Автор 6 руководств
