Введение

A guide on how to replace the bass remote in the Kicker CXA300.1

Запчасти

Никакие детали не требуются.

  1. Remove the five T10 Torx screws on silver plate. Remove the five T10 Torx screws on silver plate.
    • Remove the five T10 Torx screws on silver plate.

  2. Remove the two T10 Torx screws from the faceplate.
    • Remove the two T10 Torx screws from the faceplate.

  3. Free shipping on all orders over 100 $ or containing a Pro Tech Toolkit!

    Посмотрите наш магазин
  4. Remove the six T10 Torx screws from the bottom. Remove bottom panel.
    • Remove the six T10 Torx screws from the bottom.

    • Remove bottom panel.

  5. Desolder the remote receiver from the motherboard.
    • Desolder the remote receiver from the motherboard.

Заключение

To reassemble your device, follow these instructions in reverse order.

Tim Keptya

Участник с: 12.04.2018

519 Репутация

Автор 4 руководств

Команда

UW Tacoma, Team S1-G3, Liner Spring 2018 Member of UW Tacoma, Team S1-G3, Liner Spring 2018

UWT-LINER-S18S1G3

3 членов

Автор 4 руководств

Комментариев: 0

Добавить комментарий

Просмотр статистики:

За 24 часа: 0

За 7 дней: 1

За 30 дней: 1

За всё время: 67