Этот документ имеет более свежие изменения. Перейти к последней непроверенной версии.
Выберете то, что вам нужно
-
-
Use the flat end of a spudger to peel the ambient light sensor cable off of the frame.
-
-
-
-
Use the flat end of a spudger to peel up the silver tape securing the antenna cable.
-
-
-
Remove the five 3.6 mm Phillips #00 screws securing the frame and ambient light sensor.
-
Почти готово!
To reassemble your device, follow these instructions in reverse order.
Заключение
To reassemble your device, follow these instructions in reverse order.