Введение

Adjusting the beater head is a simple process involving only some handling of a screwdriver.

Запчасти

Никакие детали не требуются.

Lift the mixer arm and locate the large screw where the base meets the arm.
  • Lift the mixer arm and locate the large screw where the base meets the arm.

  • Using a flathead screwdriver, turn the screw counter-clockwise to raise the beater head or turn it clockwise to lower the beater head.

  • The beater head should pass only about 1/16th of an inch above the base of the bowl. One good way to get the height right is to place a dime in the bowl and adjust the height until the beater head barely brushes the dime as it passes.

Thank you! Problem solved!!!

mirdel - Ответить

Заключение

Once your beater head is at the appropriate height, you're good to go.

2 участников успешно повторили данное руководство.

Markus Gemperle

Участник с: 13.10.2014

468 Репутация

Автор 2 руководств

Команда

Cal Poly, Team 14-28, Maness Fall 2014 Member of Cal Poly, Team 14-28, Maness Fall 2014

CPSU-MANESS-F14S14G28

4 членов

Автор 12 руководств

Один комментарий

Very helpful. Thank you for the info, it worked!!

suz - Ответить

Добавить комментарий

Просмотр статистики:

За 24 часа: 2

За 7 дней: 23

За 30 дней: 68

За всё время: 3,159