Введение

How to remove the buttons.

Запчасти

Никакие детали не требуются.

  1. Position the camera with the bottom facing up. With your finger, slide the battery cover in the direction of open arrow. The battery cover will spring open, so be careful to lift it up gently.
    • Position the camera with the bottom facing up.

    • With your finger, slide the battery cover in the direction of open arrow.

    • The battery cover will spring open, so be careful to lift it up gently.

  2. Use a Phillips #00 screwdriver to remove the seven 4.5mm screws. There are 2 on the left There are 2 on the right
    • Use a Phillips #00 screwdriver to remove the seven 4.5mm screws.

    • There are 2 on the left

    • There are 2 on the right

    • There are 3 on the bottom

  3. Free shipping on all orders over 100 $ or containing a Pro Tech Toolkit!

    Посмотрите наш магазин
  4. Firmly grasp and pull back casing off. Firmly grasp and pull back casing off. Firmly grasp and pull back casing off.
    • Firmly grasp and pull back casing off.

  5. Use #00 screwdriver to pry off buttons. Use #00 screwdriver to pry off buttons. Use #00 screwdriver to pry off buttons.
    • Use #00 screwdriver to pry off buttons.

Заключение

To reassemble your device, follow these instructions in reverse order.

Alan Galarza

Участник с: 03.10.2010

69 Репутация

Автор 3 руководств

Команда

Cal Poly, Team 7-51, Amido Fall 2010 Member of Cal Poly, Team 7-51, Amido Fall 2010

CPSU-AMIDO-F10S7G51

4 членов

Автор 7 руководств

Один комментарий

Thank you this was very helpful!

carolnelson - Ответить

Добавить комментарий

Просмотр статистики:

За 24 часа: 0

За 7 дней: 1

За 30 дней: 3

За всё время: 1,181