Перейти к основному содержанию

Отремонтируйте ваше устройство

Обучение ремонту

Магазин

Введение

This guide will walk you through the process of replacing the back cover of the Kodak Signet 35.

  1. While the lens is facing away from you, there is a button at the center of the latch on the right side. Press this button with your finger and slide the latch downward. This will disengage the latch, opening the back of the camera. While the lens is facing away from you, there is a button at the center of the latch on the right side. Press this button with your finger and slide the latch downward. This will disengage the latch, opening the back of the camera. While the lens is facing away from you, there is a button at the center of the latch on the right side. Press this button with your finger and slide the latch downward. This will disengage the latch, opening the back of the camera.
    • While the lens is facing away from you, there is a button at the center of the latch on the right side. Press this button with your finger and slide the latch downward. This will disengage the latch, opening the back of the camera.

  2. SKIP THE UPGRADE

    Save by fixing with an all-in-one kit.

    Shop iPhone Fix Kits

    SKIP THE UPGRADE

    Save by fixing with an all-in-one kit.

    Shop iPhone Fix Kits
  3. Open the back cover and it will unhitch on the left.
    • Open the back cover and it will unhitch on the left.

Заключение

To reassemble your device, follow these instructions in reverse order.

Christopher Negron

Участник с: 11.09.2016

113 Репутация

1 руководство автора

Команда

USF Tampa, Team 6-3, Remmell Fall 2016 Участник USF Tampa, Team 6-3, Remmell Fall 2016

USFT-REMMELL-F16S6G3

4 членов

Автор 5 руководств

Комментариев: 0

Добавить комментарий

Просмотр статистики:

За последние 24часов: 0

За последние 7 дней: 0

За последние 30 дней: 0

За всё время: 213