Перейти к основному содержанию

Kolcraft Cloud Plus Wheel Replacement

Выберете то, что вам нужно

  1. Kolcraft Cloud Plus Wheel Replacement, Wheel: шаг 1, изображение 1 из 2 Kolcraft Cloud Plus Wheel Replacement, Wheel: шаг 1, изображение 2 из 2
    • Applying too much force to the spudger can cause the spudger to bend or the hubcap to break. To avoid this, try prying the hubcap from a different angle or positioning your spudger at a different points around the hubcap.

    • Use the spaded side of the metal spudger to pry off the small black hubcap on the outside of the rear wheel.

  2. Kolcraft Cloud Plus Wheel Replacement: шаг 2, изображение 1 из 2 Kolcraft Cloud Plus Wheel Replacement: шаг 2, изображение 2 из 2
    • Pull on the looped end of the cotter pin to remove it.

  3. Kolcraft Cloud Plus Wheel Replacement: шаг 3, изображение 1 из 2 Kolcraft Cloud Plus Wheel Replacement: шаг 3, изображение 2 из 2
    • Remove the metal washer by sliding it off the axle.

  4. Kolcraft Cloud Plus Wheel Replacement: шаг 4, изображение 1 из 1
    • Slide the wheel off of the axle.

Заключение

To reassemble your device, follow these instructions in reverse order.

Еще один человек закончил это руководство.

Christopher Peterson

Участник с: 10/01/15

330 Репутация

Автор 3 руководств

Команда

Cal Poly, Team 11-1, Forte Fall 2015 Участник Cal Poly, Team 11-1, Forte Fall 2015

CPSU-FORTE-F15S11G1

4 членов

Автор 3 руководств

0 Комментариев

Добавить комментарий

Просмотр статистики:

За последние 24часов: 2

За последние 7 дней: 11

За последние 30 дней: 41

За всё время: 4,279