Введение

To isolate the LCD screen, one needs to be gentle with separating parts and removing screws from the camera.

Запчасти

Никакие детали не требуются.

  1. Unscrew the two 2.9 mm screws on the side of the screen that connect the front and back cover of the LCD screen. Use a #00 screwdriver.
    • Unscrew the two 2.9 mm screws on the side of the screen that connect the front and back cover of the LCD screen. Use a #00 screwdriver.

  2. Unscrew the 2.9 mm side screws on the other side of the screen using the #00 screwdriver. These also hold the screen covers together.
    • Unscrew the 2.9 mm side screws on the other side of the screen using the #00 screwdriver. These also hold the screen covers together.

    • To get to the second screw, rotate the screen.

    • Gently peel off the front and back cover of the screen.

    • Peel back the plastic cover.

    • Gently pull off the screen from the base.

    • A small metal piece between the screen cover and the screen may fall out during repair. Remember to replace it with the rounded corners facing away from the screen during reassembly.

    • This takes a little force.

    • Unplug the wires that are attaching the screen to the circuit board.

Заключение

To reassemble your device, follow these instructions in reverse order.

3 участников успешно повторили данное руководство.

konrad

Участник с: 11.01.2011

217 Репутация

Автор 3 руководств

Команда

Cal Poly, Team 7-31, Regan Winter 2011 Member of Cal Poly, Team 7-31, Regan Winter 2011

CPSU-REGAN-W11S7G31

6 членов

Автор 6 руководств

Один комментарий

MY screen is dark after touched water, do I need to change this screen? Where can I buy this screen? How much?

Thank you for the guidance.

jennifer

yu123xi@yahoo.com

yu123xi - Ответить

Просмотр статистики:

За 24 часа: 0

За 7 дней: 2

За 30 дней: 13

За всё время: 3,334