Перейти к основному содержанию

Отремонтируйте ваше устройство

Обучение ремонту

Запчасти и инструменты

  1. Use a Spudger to remove the two front plastic covers to reveal screws. Use a Spudger to remove the two front plastic covers to reveal screws.
    • Use a Spudger to remove the two front plastic covers to reveal screws.

  2. Remove two screws using a Torx T6 screwdriver.
    • Remove two screws using a Torx T6 screwdriver.

  3. Essential Electronics Toolkit

    Small Toolkit. Big Possibilities.

    Shop Toolkits

    Essential
    Electronics
    Toolkit

    Shop Toolkits
  4. Pry off the screen front cover with a small flathead screwdriver. Pry off the screen front cover with a small flathead screwdriver.
    • Pry off the screen front cover with a small flathead screwdriver.

  5. Insert a small flathead screwdriver into the hinge and separate hinge connection.
    • Insert a small flathead screwdriver into the hinge and separate hinge connection.

  6. Pry off the speaker which is glued on to the front cover using a small flathead screwdriver.
    • Pry off the speaker which is glued on to the front cover using a small flathead screwdriver.

  7. Remove remaining portion of the front case from the flexible circuit board.
    • Remove remaining portion of the front case from the flexible circuit board.

    • Do not attempt to remove the LCD board at this time, as it is attached to the rear panel assembly.

Заключение

To reassemble your device, follow these instructions in reverse order.

Еще один человек закончил это руководство.

Nicholas Schmidt

Участник с: 09.10.2010

97 Репутация

Автор 7 руководств

Команда

Cal Poly, Team 3-25, Regan Fall 2010 Участник Cal Poly, Team 3-25, Regan Fall 2010

CPSU-REGAN-F10S3G25

4 членов

Автор 14 руководств

Комментариев: 0

Добавить комментарий

Просмотр статистики:

За последние 24часов: 0

За последние 7 дней: 0

За последние 30 дней: 0

За всё время: 903