Введение

Use this guide to remove the speakers from the device.

Запчасти

Никакие детали не требуются.

  1. Use the spudger to pry out the indicated rubber squares. Use the #0 Phillips screwdriver to take out the revealed screws. Use the #0 Phillips screwdriver to take out the revealed screws.
    • Use the spudger to pry out the indicated rubber squares.

    • Use the #0 Phillips screwdriver to take out the revealed screws.

  2. Carefully lodge the spudger between the face plate and the hinge mechanism. Gently pry the face plate until it releases from place holders. Gently pry the face plate until it releases from place holders.
    • Carefully lodge the spudger between the face plate and the hinge mechanism.

    • Gently pry the face plate until it releases from place holders.

  3. Free shipping on all orders over 100 $ or containing a Pro Tech Toolkit!

    Посмотрите наш магазин
  4. Using a spudger, detach the speakers from their place holders. Using a spudger, detach the speakers from their place holders.
    • Using a spudger, detach the speakers from their place holders.

  5. Using the spudger, pry between the speaker circuit board and base to detach with ease.
    • Using the spudger, pry between the speaker circuit board and base to detach with ease.

Заключение

To reassemble your device, follow these instructions in reverse order.

2 участников успешно повторили данное руководство.

Harry Black

Участник с: 20.04.2010

56 Репутация

1 Guide authored

Команда

Cal Poly, Team 10-44, Garner Spring 2010 Member of Cal Poly, Team 10-44, Garner Spring 2010

CPSU-GARNER-S10S10G44

4 членов

Автор 18 руководств

Комментариев: 0

Добавить комментарий

Просмотр статистики:

За 24 часа: 0

За 7 дней: 1

За 30 дней: 3

За всё время: 1,437