Перейти к основному содержанию

LG Optimus T Motherboard Replacement

Выберете то, что вам нужно

  1. LG Optimus T Motherboard Replacement, Motherboard: шаг 1, изображение 1 из 3 LG Optimus T Motherboard Replacement, Motherboard: шаг 1, изображение 2 из 3 LG Optimus T Motherboard Replacement, Motherboard: шаг 1, изображение 3 из 3
    • Working on your device while it is turned on may result in electric shock. Make sure to shut down and unplug your device before you begin.

    • Using a prying device, such as a plastic opening tool, remove the phone’s back cover. At the top of the phone, there’s an indentation to put the Spudger into to pop the case off

  2. LG Optimus T Motherboard Replacement: шаг 2, изображение 1 из 1
    • Remove the battery. There’s an indentation to the left of the camera lens to pull up on the battery with your finger

  3. LG Optimus T Motherboard Replacement: шаг 3, изображение 1 из 1
    • Use a J0 screwdriver to remove the six 4.5mm screws.

  4. LG Optimus T Motherboard Replacement: шаг 4, изображение 1 из 2 LG Optimus T Motherboard Replacement: шаг 4, изображение 2 из 2
    • You might have difficulty popping the interior case off. You may use the metal spudger here with caution if the plastic opening tool fails

    • Remove interior case. Insert the spudger into the indentations at the top, or bottom of the phone to pry off the interior case.

  5. LG Optimus T Motherboard Replacement: шаг 5, изображение 1 из 1
    • Pull up on connector tab

  6. LG Optimus T Motherboard Replacement: шаг 6, изображение 1 из 2 LG Optimus T Motherboard Replacement: шаг 6, изображение 2 из 2
    • Remove SD card mount. Insert the plastic opening tool on the right side to pop off

  7. LG Optimus T Motherboard Replacement: шаг 7, изображение 1 из 2 LG Optimus T Motherboard Replacement: шаг 7, изображение 2 из 2
    • Remove metal panel

    • There are four retaining points to insert plastic opening tool and pop off panel

  8. LG Optimus T Motherboard Replacement: шаг 8, изображение 1 из 1
    • Use a J0 screwdriver to remove the two 1.8mm screws from charging port. (Charging port and motherboard are connected.)

    • Remove motherboard

Заключение

To reassemble your device, follow these instructions in reverse order.

Еще один человек закончил это руководство.

stacey

Участник с: 02/07/17

219 Репутация

Автор 2 руководств

Команда

Ohio State, Team 1-3, Wilder Spring 2017 Участник Ohio State, Team 1-3, Wilder Spring 2017

OSU-WILDER-S17S1G3

4 членов

Автор 5 руководств

0 Комментариев

Добавить комментарий

Просмотр статистики:

За последние 24часов: 2

За последние 7 дней: 3

За последние 30 дней: 4

За всё время: 287