Перейти к основному содержанию

Введение

Shows how to remove the rear case to access all of the internals of the phone.

  1. Turn the closed phone so that the back panel is facing you.
    • Turn the closed phone so that the back panel is facing you.

    • Press down and forward firmly on the gray tab in the middle of the phone.

  2. Now just lift up on the battery and remove it from the phone. Now just lift up on the battery and remove it from the phone.
    • Now just lift up on the battery and remove it from the phone.

  3. iPhone Battery Fix Kits

    Only $29.99

    Buy Now

    iPhone Battery Fix Kits

    Only $29.99

    Buy Now
  4. Remove the rubber grommet using a Spudger.
    • Remove the rubber grommet using a Spudger.

  5. Be sure not to lose the screws. They are small!
    • Be sure not to lose the screws. They are small!

    • Remove the five screws using a Phillips #00 Screwdriver.

  6. When removing back cover, be careful not to break the speaker wires. Using an iPod Opening Tool, carefully pry off the back cover. Using Tweezers, gently pull speaker wires out.
    • When removing back cover, be careful not to break the speaker wires.

    • Using an iPod Opening Tool, carefully pry off the back cover.

    • Using Tweezers, gently pull speaker wires out.

  7. Separate the two halves.
    • Separate the two halves.

Заключение

To reassemble your device, follow these instructions in reverse order.

Matthew Hagan

Участник с: 12.04.2010

5 Репутация

1 Guide authored

Команда

Cal Poly, Team 25-88, Amido Spring 2010 Member of Cal Poly, Team 25-88, Amido Spring 2010

CPSU-AMIDO-S10S25G88

4 членов

Автор 18 руководств

Комментариев: 0

Добавить комментарий

Просмотр статистики:

За 24 часа: 0

За 7 дней: 0

За 30 дней: 0

За всё время: 1,403