Перейти к основному содержанию

Отремонтируйте ваше устройство

Обучение ремонту

Запчасти и инструменты

Запчасти

Детали не указаны.

  1. Remove the two plastic screw covers below the inside phone screen. Remove the two plastic screw covers below the inside phone screen.
    • Remove the two plastic screw covers below the inside phone screen.

  2. Unscrew both screws using a Torx T6 screwdriver.
    • Unscrew both screws using a Torx T6 screwdriver.

  3. Pry off the screen front cover with a 3mm flathead screwdriver. Pry off the screen front cover with a 3mm flathead screwdriver. Pry off the screen front cover with a 3mm flathead screwdriver.
    • Pry off the screen front cover with a 3mm flathead screwdriver.

  4. Manta Driver Kit

    112 bits for every fix.

    Upgrade Your Toolbox

    Manta Driver Kit

    Upgrade Your Toolbox
  5. Pry off the speaker, which is glued onto the front cover, using a small flathead screwdriver. Pry off the speaker, which is glued onto the front cover, using a small flathead screwdriver. Pry off the speaker, which is glued onto the front cover, using a small flathead screwdriver.
    • Pry off the speaker, which is glued onto the front cover, using a small flathead screwdriver.

  6. Unsolder the black and red wires of the speaker from where they are attached to the base of the screen.
    • Unsolder the black and red wires of the speaker from where they are attached to the base of the screen.

  7. Obtain replacement speaker and solder the new black and red wires back to the base of the screen.
    • Obtain replacement speaker and solder the new black and red wires back to the base of the screen.

  8. Apply glue to the back of the speaker and place it back in its original position.
    • Apply glue to the back of the speaker and place it back in its original position.

Заключение

To reassemble your device, follow these instructions in reverse order.

Еще один человек закончил это руководство.

Nicholas Schmidt

Участник с: 09.10.2010

97 Репутация

Автор 7 руководств

Команда

Cal Poly, Team 3-25, Regan Fall 2010 Участник Cal Poly, Team 3-25, Regan Fall 2010

CPSU-REGAN-F10S3G25

4 членов

Автор 14 руководств

Комментариев: 0

Добавить комментарий

Просмотр статистики:

За последние 24часов: 0

За последние 7 дней: 0

За последние 30 дней: 0

За всё время: 739