Skip to main content

Введение

If the filter in the fan is dirty and needs to be replaced, use this guide to learn how to dissemble the top part of the fan and replace your filter.

Запчасти

No parts specified.

  1. On the backside of the fan, remove the top two 4mm Phillips #Y1 screws using PH 1 bit and Magnetic Driver
    • On the backside of the fan, remove the top two 4mm Phillips #Y1 screws using PH 1 bit and Magnetic Driver

  2. Remove the top plastic portion of the fan
    • Remove the top plastic portion of the fan

  3. iPhone Battery Fix Kits

    Only $29.99

    Buy Now

    iPhone Battery Fix Kits

    Only $29.99

    Buy Now
  4. Remove all four 4mm screws using the Phillips #1 screwdriver.
    • Remove all four 4mm screws using the Phillips #1 screwdriver.

  5. Remove the filter from the fan.
    • Remove the filter from the fan.

Заключение

To reassemble your device, follow these instructions in reverse order.

Julie Ling

Участник с: 22.10.2018

159 Репутация

1 Guide authored

Команда

UC Davis, Team S11-G2, Lore Fall 2018 Member of UC Davis, Team S11-G2, Lore Fall 2018

UCD-LORE-F18S11G2

4 членов

1 Guide authored

Комментариев: 0

Добавить комментарий

Просмотр статистики:

За 24 часа: 0

За 7 дней: 4

За 30 дней: 17

За всё время: 67