Перейти к основному содержанию

Введение

In order to get to the back interface of the Lenovo 100e Chromebook 2nd gen to do further detailed repairs, it is important to know how to take the keyboard of the laptop. For this guide, you will need a plastic opening tool and a Philips head screwdriver.

Запчасти

Детали не указаны.

  1. Remove the nine 6 mm screws from the back of the laptop using a Phillips #0 screwdriver.
    • Remove the nine 6 mm screws from the back of the laptop using a Phillips #0 screwdriver.

  2. Open the laptop and lay it flat. Go along the edge of the keyboard with an opening tool until it pops loose.
    • Open the laptop and lay it flat.

    • Go along the edge of the keyboard with an opening tool until it pops loose.

    • Potential for device damage: Make sure that the keyboard does not fall away from the laptop, as it is still connected to the internal components

  3. Lift the keyboard connectors up using an opening pick. Remove the connectors from their sockets.
    • Lift the keyboard connectors up using an opening pick.

    • Remove the connectors from their sockets.

Заключение

To reassemble your device, follow these instructions in reverse order.

Еще один человек закончил это руководство.

Pup Washington

Участник с: 14.01.2021

569 Репутация

Автор 6 руководств

Команда

Illinois Wesleyan University, Team S1-G4, Bullock Spring 2021 Участник Illinois Wesleyan University, Team S1-G4, Bullock Spring 2021

IWU-BULLOCK-S21S1G4

4 членов

Автор 7 руководств

Комментариев: 0

Добавить комментарий

Просмотр статистики:

За последние 24часов: 6

За последние 7 дней: 14

За последние 30 дней: 41

За всё время: 233