Skip to main content

Introduction

This guide will show the steps needed to take out and replace the speakers in the Lenovo Chromebook 100e 2nd gen. The tools required for this guide are a Phillips head screwdriver and a plastic pick.

  1. Remove the nine 6 mm screws from the back of the laptop using a Phillips #0 screwdriver.
    • Remove the nine 6 mm screws from the back of the laptop using a Phillips #0 screwdriver.

  2. Open the laptop and lay it flat. Go along the edge of the keyboard with an opening tool until it pops loose.
    • Open the laptop and lay it flat.

    • Go along the edge of the keyboard with an opening tool until it pops loose.

    • Potential for device damage: Make sure that the keyboard does not fall away from the laptop, as it is still connected to the internal components

  3. Lift the keyboard connectors up using an opening pick. Remove the connectors from their sockets.
    • Lift the keyboard connectors up using an opening pick.

    • Remove the connectors from their sockets.

  4. Using an opening pick, disconnect the speakers from the headphone jack.
    • Using an opening pick, disconnect the speakers from the headphone jack.

  5. Remove the two 2 mm Phillips #0 screws holding both of the speakers in.
    • Remove the two 2 mm Phillips #0 screws holding both of the speakers in.

  6. The speakers are now loose and can be removed from the laptop.
    • The speakers are now loose and can be removed from the laptop.

Conclusion

To reassemble your device, follow these instructions in reverse order.

0 Comments

Add Comment

View Statistics:

Past 24 Hours: 0

Past 7 Days: 1

Past 30 Days: 10

All Time: 121