Выберете то, что вам нужно
-
-
Lay the computer down on its side as shown.
-
Remove the two 14mm screws shown. The screws are loose enough to unscrew with your hands.
-
-
-
-
With your hands remove the 14mm screw that holds the cover on the back panel.
-
Gently pull the flap back to expose the expansion card retaining screw.
-
-
-
Use the Phillips #2 to remove the 8mm screw that holds the USB 3.0 Expansion Card in place.
-
-
-
With moderate force, pull straight up on the expansion card to remove it from the computer.
-
To reassemble your device, follow these instructions in reverse order.
To reassemble your device, follow these instructions in reverse order.
Отменить: Я не выполнил это руководство.
3 участников успешно повторили данное руководство.
Команда
Cal Poly, Team 10-39, Amido Fall 2014 Участник Cal Poly, Team 10-39, Amido Fall 2014
CPSU-AMIDO-F14S10G39
4 членов
Автор 18 руководств
Один комментарий
Why is a USB 3.1 Gen 1 adapter card called TV Tuner? It is an adapter card. What you connect to it is irelevant.
