Введение

This guide will show you how to open the bottom panel on your Lenovo IdeaPad U410 using a Phillips #1 and metal spudger.

  1. Using the metal spudger, remove all the rubber squares on the bottom of the laptop. Using the metal spudger, remove all the rubber squares on the bottom of the laptop.
    • Using the metal spudger, remove all the rubber squares on the bottom of the laptop.

  2. Free shipping on all orders over 100 $ or containing a Pro Tech Toolkit!

    Посмотрите наш магазин
  3. Remove the three 6 mm Phillips #1 screws  holding the panel on the laptop. Pry the panel from the laptop using your hands or the metal spudger if necessary. Pry the panel from the laptop using your hands or the metal spudger if necessary.
    • Remove the three 6 mm Phillips #1 screws holding the panel on the laptop.

    • Pry the panel from the laptop using your hands or the metal spudger if necessary.

Заключение

To reassemble your device, follow these instructions in reverse order.

One other person completed this guide.

Edric An

Участник с: 18.09.2018

403 Репутация

Автор 3 руководств

Команда

University of North Texas, Team S3-G5, Raign Fall 2018 Member of University of North Texas, Team S3-G5, Raign Fall 2018

UNT-RAIGN-F18S3G5

4 членов

Автор 6 руководств

Комментариев: 0

Просмотр статистики:

За 24 часа: 0

За 7 дней: 2

За 30 дней: 7

За всё время: 49