Выберете то, что вам нужно
-
-
Remove the thirteen 6.5 mm screws from the base plate using a Phillips #00 screwdriver.
-
-
-
Flip the laptop on its side and wedge a spudger between the base panel and chassis, then pry around the perimeter until the base panel releases.
-
Lift the bottom panel off of the chassis.
-
-
-
-
Use a Phillips #00 screwdriver to remove the single screw securing the Wi-Fi card.
-
Почти готово!
To reassemble your device, follow these instructions in reverse order.
Заключение
To reassemble your device, follow these instructions in reverse order.