Перейти к основному содержанию

Введение

This guide will give you the instructions needed to replace the laptop's cooling fan. The fan is needed to keep the laptop from overheating.

Запчасти

Детали не указаны.

  1. Remove the 8 screws holding down the back panel using the Phillips screw driver #000. Remove the 8 screws holding down the back panel using the Phillips screw driver #000.
    • Remove the 8 screws holding down the back panel using the Phillips screw driver #000.

  2. Remove the 9 wafer-head screws, size M2x4mm, using the Phillips screwdriver #000. Remove the 9 wafer-head screws, size M2x4mm, using the Phillips screwdriver #000.
    • Remove the 9 wafer-head screws, size M2x4mm, using the Phillips screwdriver #000.

  3. Remove the fan's cable using the plastic opening tool.
    • Remove the fan's cable using the plastic opening tool.

  4. Gently, remove the black and white wires surrounding the fan.
    • Gently, remove the black and white wires surrounding the fan.

    • The wires will be connected around the fan, you will have to remove them.

Заключение

To reassemble your device, follow these instructions in reverse order.

Mohammed AlManai

Участник с: 05.04.2018

636 Репутация

Автор 6 руководств

Команда

Linn Benton Community College, Team S2-G2, Johnson Spring 2018 Участник Linn Benton Community College, Team S2-G2, Johnson Spring 2018

LBCC-JOHNSON-S18S2G2

4 членов

Автор 7 руководств

Комментариев: 0

Добавить комментарий

Просмотр статистики:

За последние 24часов: 0

За последние 7 дней: 0

За последние 30 дней: 4

За всё время: 225