Перейти к основному содержанию

Отремонтируйте ваше устройство

Обучение ремонту

Запчасти и инструменты

Введение

Follow this guide to successfully replace the ribbon cable and camera for the Lenovo ThinkPad Tablet 1838.

Запчасти

Детали не указаны.

  1. To access the camera,  remove the button covers by prying them off.
    • To access the camera, remove the button covers by prying them off.

  2. After removing the buttons, remove the two screws marked.
    • After removing the buttons, remove the two screws marked.

  3. Manta Driver Kit

    112 bits for every fix.

    Upgrade Your Toolbox

    Manta Driver Kit

    Upgrade Your Toolbox
  4. Carefully pry off the outer perimeter of the tablet using a plastic opening tool.
    • Carefully pry off the outer perimeter of the tablet using a plastic opening tool.

  5. Lift the tab located on the back and slide it out to remove the ribbon cable. Only the back side of the cable has been removed—the other can remain connected.
    • Lift the tab located on the back and slide it out to remove the ribbon cable.

    • Only the back side of the cable has been removed—the other can remain connected.

  6. Remove the marked screw and lift out the entire camera assembly. Remove the marked screw and lift out the entire camera assembly. Remove the marked screw and lift out the entire camera assembly.
    • Remove the marked screw and lift out the entire camera assembly.

Заключение

To reassemble your device, follow these instructions in reverse order.

Juan Rojo

Участник с: 21.09.2018

174 Репутация

1 руководство автора

Команда

University of North Texas, Team S1-G2, Riccardelli Fall 2018 Участник University of North Texas, Team S1-G2, Riccardelli Fall 2018

UNT-RICCARDELLI-F18S1G2

4 членов

Автор 5 руководств

Комментариев: 0

Добавить комментарий

Просмотр статистики:

За последние 24часов: 0

За последние 7 дней: 0

За последние 30 дней: 6

За всё время: 96