Перейти к основному содержанию

Lenovo bluetooth mouse N6901A disassembly

Выберете то, что вам нужно

  1. Lenovo bluetooth mouse N6901A disassembly, Mouse: шаг 1, изображение 1 из 1
    • 3 Phillips screws are located under the battery cover, unscrew them

  2. Lenovo bluetooth mouse N6901A disassembly: шаг 2, изображение 1 из 2 Lenovo bluetooth mouse N6901A disassembly: шаг 2, изображение 2 из 2
    • The mouse cover at the bottom should move freely but at the top is hold by 2 brackets

    • In order to remove the mouse cover, you will need to rock left/right the cover and slide it down (from scroll wheel toward the Lenovo logo)

  3. Lenovo bluetooth mouse N6901A disassembly: шаг 3, изображение 1 из 2 Lenovo bluetooth mouse N6901A disassembly: шаг 3, изображение 2 из 2
    • At this point, you have separated the mouse cover

  4. Lenovo bluetooth mouse N6901A disassembly: шаг 4, изображение 1 из 1
    • Use the appropriate tool to remove gently the power connector. Don't use your finger, you might brake the cable

  5. Lenovo bluetooth mouse N6901A disassembly: шаг 5, изображение 1 из 2 Lenovo bluetooth mouse N6901A disassembly: шаг 5, изображение 2 из 2
    • The micro switch can be replaced by OMRON D2FC-F-7N but you need to trim the solder terminals with a flush wire cutter

    • When you reassemble the mouse, make sure you don't crush the power cable

Заключение

To reassemble your device, follow these instructions in reverse order.

Еще один человек закончил это руководство.

Shinn Chyang Chen

Участник с: 09/14/11

2 923 Репутация

Автор 3 руководств

0 Комментариев

Добавить комментарий

Просмотр статистики:

За последние 24часов: 3

За последние 7 дней: 10

За последние 30 дней: 43

За всё время: 5,511