Введение

This guide shows how to remove the battery cover and battery of this device. It shows the location of the screw and where to insert the spudger.

Запчасти

  1. Remove the 5.0mm screw using the Phillips #0 head screwdriver.
    • Remove the 5.0mm screw using the Phillips #0 head screwdriver.

  2. Insert metal spudger as shown in the picture. Move spudger along  to the other side until both snaps come loose.
    • Insert metal spudger as shown in the picture. Move spudger along to the other side until both snaps come loose.

  3. Free shipping on all orders over 100 $ or containing a Pro Tech Toolkit!

    Посмотрите наш магазин
  4. Picture shows the removed battery cover.
    • Picture shows the removed battery cover.

  5. Slide the battery out by pulling on one of two plastics tabs.
    • Slide the battery out by pulling on one of two plastics tabs.

Заключение

To reassemble your device, follow these instructions in reverse order.

Yancey Crase

Участник с: 26.03.2018

217 Репутация

Автор 2 руководств

Команда

IUPUI, Team S1-G4, Harley Spring 2018 Member of IUPUI, Team S1-G4, Harley Spring 2018

IUPUI-HARLEY-S18S1G4

7 членов

Автор 5 руководств

Комментариев: 0

Добавить комментарий

Просмотр статистики:

За 24 часа: 2

За 7 дней: 4

За 30 дней: 13

За всё время: 142