Перейти к основному содержанию

MAGNAVOX MDV2300 Power Cord Replacement

Выберете то, что вам нужно

  1. MAGNAVOX MDV2300 Power Cord Replacement, Power Cord: шаг 1, изображение 1 из 1
    • Make sure the device is unplugged from the wall.

  2. MAGNAVOX MDV2300 Power Cord Replacement: шаг 2, изображение 1 из 1
    • Unscrew the two screws that hold together the top panel.

  3. MAGNAVOX MDV2300 Power Cord Replacement: шаг 3, изображение 1 из 1
    • Remove the top panel.

  4. MAGNAVOX MDV2300 Power Cord Replacement: шаг 4, изображение 1 из 1
  5. MAGNAVOX MDV2300 Power Cord Replacement: шаг 5, изображение 1 из 2 MAGNAVOX MDV2300 Power Cord Replacement: шаг 5, изображение 2 из 2
    • Remove disc drive by unscrewing the 2 screws that hold the drive in place.

  6. MAGNAVOX MDV2300 Power Cord Replacement: шаг 6, изображение 1 из 1
    • Identify the power cord.

    • The cord must either be too short or torn to warrant replacement.

  7. MAGNAVOX MDV2300 Power Cord Replacement: шаг 7, изображение 1 из 1
    • Cut the old wire out from the chip.

    • Attach the new wire into the housing.

    • Line up new wire with the appropriate holes and solder to board.

    • The white wire will be your neutral and the black wire will be your negative. View link of how to solder in order to replace the power cord. http://www.instructables.com/id/How-to-s...

Заключение

After soldering, let cool and then reassemble your device, follow these instructions in reverse order.

Еще один человек закончил это руководство.

Justin

Участник с: 01/21/15

298 Репутация

Автор 2 руководств

Команда

Penn State, Team 1-41, Kaschak Winter 2015 Участник Penn State, Team 1-41, Kaschak Winter 2015

PSU-KASCHAK-W15S1G41

4 членов

Автор 2 руководств

0 Комментариев

Добавить комментарий

Просмотр статистики:

За последние 24часов: 0

За последние 7 дней: 2

За последние 30 дней: 3

За всё время: 508