Перейти к основному содержанию

Введение

The process to replace the battery involves a few steps. The first step is unscrewing the 15 screws that hold the bottom plate together to gain access to the battery. The second step is unplugging the battery carefully to be replaced.

Запчасти

Детали не указаны.

  1. Remove the eleven 5mm screws with a Phillips #0 bit. Remove the four 2.5mm screws with a Phillips #0 bit.
    • Remove the eleven 5mm screws with a Phillips #0 bit.

    • Remove the four 2.5mm screws with a Phillips #0 bit.

  2. After opening the bottom plate, locate the battery and the battery connection. After opening the bottom plate, locate the battery and the battery connection.
    • After opening the bottom plate, locate the battery and the battery connection.

  3. Unplug the battery connection carefully from the motherboard, and remove the old battery. Unplug the battery connection carefully from the motherboard, and remove the old battery.
    • Unplug the battery connection carefully from the motherboard, and remove the old battery.

Заключение

To reassemble your device, follow these instructions in reverse order.

5 участников успешно повторили данное руководство.

Azher Hamid

Участник с: 28.09.2017

375 Репутация

Автор 2 руководств

Команда

USF Tampa, Team S1-G4, Nance Fall 2017 Участник USF Tampa, Team S1-G4, Nance Fall 2017

USFT-NANCE-F17S1G4

3 членов

Автор 5 руководств

Один комментарий

The screws on corners doesnt have the same length. The Guide is wrong carefull!

Hüseyin Temizkan - Ответить

Добавить комментарий

Просмотр статистики:

За последние 24часов: 0

За последние 7 дней: 0

За последние 30 дней: 19

За всё время: 4,855