Перейти к основному содержанию

Введение

Replace a Faulty PCIe Fan

Инструменты

Запчасти

Детали не указаны.

  1. Begin by pulling up on the lever located at the back of the computer to remove the side panel.
    • Begin by pulling up on the lever located at the back of the computer to remove the side panel.

  2. Gently pull outward on each of the four hard drive trays to remove them.
    • Gently pull outward on each of the four hard drive trays to remove them.

  3. Remove the two 10mm PH #1 screws holding in the PCIe fan.
    • Remove the two 10mm PH #1 screws holding in the PCIe fan.

    • They are very tightened, if you do it wrong the screw might get stripped.

  4. Gently pull the fan straight outward to remove it.
    • Gently pull the fan straight outward to remove it.

Заключение

To reassemble your device, follow these instructions in reverse order.

2 участников успешно повторили данное руководство.

Andrew Damiani

Участник с: 30.07.2017

164 Репутация

1 руководство автора

Комментариев: 0

Добавить комментарий

Просмотр статистики:

За последние 24часов: 1

За последние 7 дней: 22

За последние 30 дней: 63

За всё время: 3,673