Перейти к основному содержанию

Введение

Prereq only.

Запчасти

Детали не указаны.

  1. Mac Pro Late 2013 Power Supply Assembly Replacement, Power Supply Assembly: step 1, image 1 of 1
    • Flip the Mac Pro back over and set it gently on a flat surface.

    • We recommend laying the Mac Pro on the corner of the heat sink and the two standoff screw posts that attach to the interconnect board.

  2. Mac Pro Late 2013 Power Supply Assembly Replacement: step 2, image 1 of 2 Mac Pro Late 2013 Power Supply Assembly Replacement: step 2, image 2 of 2
    • Remove the two 3.6 mm T5 Torx screws from the sides of the power supply cage (one on each side).

  3. Mac Pro Late 2013 Power Supply Assembly Replacement: step 3, image 1 of 1
    • Remove the power supply cage from the top of the power supply.

    • By removing this cage, you are exposing internal components of the power supply. Be very careful not to touch any of the power supply components or circuitry.

    • Be careful not to drop any screws or tools into the power supply, as this may damage the power supply.

  4. Mac Pro Late 2013 Power Supply Assembly Replacement: step 4, image 1 of 1
    • Remove the four 5.5 mm T8 Torx screws securing the power supply assembly to the Mac Pro.

  5. Mac Pro Late 2013 Power Supply Assembly Replacement: step 5, image 1 of 1
    • Remove the power supply assembly from the Mac Pro.

Заключение

To reassemble your device, follow these instructions in reverse order.

Andrew Optimus Goldheart

Участник с: 17.10.2009

488 187 Репутация

Автор 410 руководств

Команда

iFixit Участник iFixit

Community

146 членов

Автор 15 582 руководств

Комментариев: 0

Добавить комментарий

Просмотр статистики:

За последние 24часов: 0

За последние 7 дней: 0

За последние 30 дней: 0

За всё время: 67