Перейти к основному содержанию

Введение

Use this guide to replace a damaged lower case.

    • Before proceeding, power down your MacBook. Close the display and lay it on a soft surface, top-side down.

    • Use a P5 Pentalobe driver to remove ten screws securing the lower case, of the following lengths:

    • Two 9 mm screws

    • Eight 2.6 mm screws

  1. Wedge your fingers between the display and the lower case and pull upward to pop the lower case off the Air.
    • Wedge your fingers between the display and the lower case and pull upward to pop the lower case off the Air.

    • Remove the lower case and set it aside.

Заключение

To reassemble your device, follow these instructions in reverse order.

11 участников успешно повторили данное руководство.

Andrew Optimus Goldheart

Участник с: 17.10.2009

430 007 Репутация

Автор 411 руководств

Команда

iFixit Member of iFixit

Community

107 членов

Автор 9 591 руководств

Добавить комментарий

Просмотр статистики:

Past 24 Hours: 1

Past 7 Days: 13

Past 30 Days: 84

За всё время: 8,544