Перейти к основному содержанию

Введение

Prereq for display assembly.

Инструменты

Запчасти

Детали не указаны.

  1. Use the tip of a spudger to push the iSight camera cable connector straight away from its socket on the logic board. It is recommended to carefully push on both sides of the connector to "walk" it out of its socket.
    • Use the tip of a spudger to push the iSight camera cable connector straight away from its socket on the logic board.

    • It is recommended to carefully push on both sides of the connector to "walk" it out of its socket.

  2. Move the iSight camera cable aside.
    • Move the iSight camera cable aside.

Заключение

To reassemble your device, follow these instructions in reverse order.

Еще один человек закончил это руководство.

Комментариев: 0

Добавить комментарий

Просмотр статистики:

За последние 24часов: 0

За последние 7 дней: 3

За последние 30 дней: 3

За всё время: 95